4,049 research outputs found
Conditions that Stabilize Membrane Domains Also Antagonize n-Alcohol Anesthesia
Diverse molecules induce general anesthesia with potency strongly correlated with both their hydrophobicity and their effects on certain ion channels. We recently observed that several n -alcohol anesthetics inhibit heterogeneity in plasma-membrane-derived vesicles by lowering the critical temperature (Tc) for phase separation. Here, we exploit conditions that stabilize membrane heterogeneity to further test the correlation between the anesthetic potency of n -alcohols and effects on Tc. First, we show that hexadecanol acts oppositely to n -alcohol anesthetics on membrane mixing and antagonizes ethanol-induced anesthesia in a tadpole behavioral assay. Second, we show that two previously described âintoxication reversersâ raise Tc and counter ethanolâs effects in vesicles, mimicking the findings of previous electrophysiological and behavioral measurements. Third, we find that elevated hydrostatic pressure, long known to reverse anesthesia, also raises Tc in vesicles with a magnitude that counters the effect of butanol at relevant concentrations and pressures. Taken together, these results demonstrate that ÎTc predicts anesthetic potency for n-alcohols better than hydrophobicity in a range of contexts, supporting a mechanistic role for membrane heterogeneity in general anesthesia
Virtual EQ â the talent differentiator in 2020?
In an increasingly competitive, globalised world, knowledge-intensive industries/ services are seen as engines for success. Key to this marketplace is a growing army of âtalentâ i.e. skilled and dedicated knowledge workers. These knowledge workers engage in non-routine problem solving through combining convergent, divergent and creative thinking across organizational and company boundaries - a process often facilitated though the internet and social media, consequently forming networks of expertise. For knowledge workers, sharing their learning with others through communities of practice embedded in new information media becomes an important element of their personal identity and the creation of their individual brand or e-social reputation. Part of the new knowledge/skills needed for this process becomes not only emotional intelligence (being attuned to the emotional needs of others) but being able to do this within and through new media, thus the emergence of virtual emotional intelligence (EQ). Our views of current research found that HRD practitioners in 2020 might need to consider Virtual EQ as part of their talent portfolio. However it seems that new technology has created strategies for capturing and managing knowledge that are readily duplicated and that a talent differentiator in 2020 might simply be the ability and willingness to learn
Absolute Magnitude of Front Surface Reflections in Ultrasonic Measurements
It has been shown in other papers in this volume (1,2) that the application of deconvolution, diffraction, and attenuation corrections to received ultrasonic signals is sufficient to extract the absolute value of the flaw scattering amplitude from the signal. This capability provides a new opportunity to obtain additional flaw characterization information from the ultrasonic signal. More specifically, it is postulated upon reasonable grounds that the absolute magnitude of the front surface ultrasonic echo from a flaw can be related to both the flaw dimensions and its acoustic impedance. Assuming that the size can be obtained by other means, the front surface echo can then be utilized to help identify the flaw. The purpose of this paper is thus twofold: 1) to utilize the diffraction and attenuation corrections developed by Thompson and Gray (3) to obtain absolute values of flaw impulse responses, and 2) to investigate the feasibility of using absolute values of front surface echoes to determine a flawâs identity
Application of the x-ray measurement model to image processing of x-ray radiographs
A computational model has been developed at which simulates the film response to the interaction of x-rays with a sample[1,2]. By using a CAD model as a virtual part, film densities of the radiograph are predicted. The number of photons which reach the film is based on the thickness of the part, part geometry, and the material absorption coefficient. Also taken into consideration are the x-ray beam characteristics, film properties, and the experimental configuration. The model generated images can vary in size and resolution, depending on the user chosen parameters. Noise is calculated using a Gaussian noise distribution and adjusted for the film type. The result of this simulation is a two-dimensional numerically generated digital image, which represents a radiograph of the part. This result can be used to analyze the flaws in an actual radiograph with the same set-up and exposure parameters
Probing the Space of Toric Quiver Theories
We demonstrate a practical and efficient method for generating toric Calabi-Yau quiver theories, applicable to both D3 and M2 brane world-volume physics. A new analytic method is presented at low order parametres and an algorithm for the general case is developed which has polynomial complexity in the number of edges in the quiver. Using this algorithm, carefully implemented, we classify the quiver diagram and assign possible superpotentials for various small values of the number of edges and nodes. We examine some preliminary statistics on this space of toric quiver theories
Simulation-based analysis of micro-robots swimming at the center and near the wall of circular mini-channels
Swimming micro robots have great potential in biomedical applications such as targeted drug delivery, medical diagnosis, and destroying blood clots in arteries. Inspired by swimming micro organisms, micro robots can move in biofluids with helical tails attached to their bodies. In order to design and navigate micro robots, hydrodynamic characteristics of the flow field must be understood well. This work presents computational fluid dynamics (CFD) modeling and analysis of the flow due to the motion of micro robots that consist of magnetic heads and helical tails inside fluid-filled channels akin to bodily conduits; special emphasis is on the effects of the radial position of the robot. Time-averaged velocities, forces, torques, and efficiency of the micro robots placed in the channels are analyzed as functions of rotation frequency, helical pitch (wavelength) and helical radius (amplitude) of the tail. Results indicate that robots move faster and more efficiently near the wall than at the center of the channel. Forces acting on micro robots are asymmetrical due to the chirality of the robotâs tail and its motion. Moreover, robots placed near the wall have a different flow pattern around the head when compared to in-center and unbounded swimmers. According to simulation results, time-averaged for-ward velocity of the robot agrees well with the experimental values measured previously for a robot with almost the same dimensions
Mapping the disease-specific LupusQoL to the SF-6D
Purpose
To derive a mapping algorithm to predict SF-6D utility scores from the non-preference-based LupusQoL and test the performance of the developed algorithm on a separate independent validation data set.
Method
LupusQoL and SF-6D data were collected from 320 patients with systemic lupus erythematosus (SLE) attending routine rheumatology outpatient appointments at seven centres in the UK. Ordinary least squares (OLS) regression was used to estimate models of increasing complexity in order to predict individualsâ SF-6D utility scores from their responses to the LupusQoL questionnaire. Model performance was judged on predictive ability through the size and pattern of prediction errors generated. The performance of the selected model was externally validated on an independent data set containing 113 female SLE patients who had again completed both the LupusQoL and SF-36 questionnaires.
Results
Four of the eight LupusQoL domains (physical health, pain, emotional health, and fatigue) were selected as dependent variables in the final model. Overall model fit was good, with R2 0.7219, MAE 0.0557, and RMSE 0.0706 when applied to the estimation data set, and R2 0.7431, MAE 0.0528, and RMSE 0.0663 when applied to the validation sample.
Conclusion
This study provides a method by which health state utility values can be estimated from patient responses to the non-preference-based LupusQoL, generalisable beyond the data set upon which it was estimated. Despite concerns over the use of OLS to develop mapping algorithms, we find this method to be suitable in this case due to the normality of the SF-6D data
Low specificity of determine HIV1/2 RDT using whole blood in south west Tanzania
Objective: To evaluate the diagnostic performance of two rapid detection tests (RDTs) for HIV 1/2 in plasma and in whole blood samples.
Methods:
More than 15,000 study subjects above the age of two years participated in two rounds of a cohort study to determine the prevalence of HIV. HIV testing was performed using the Determine HIV 1/2 test (Abbott) in the first (2006/2007) and the HIV 1/2 STAT-PAK Dipstick Assay (Chembio) in the second round (2007/2008) of the survey. Positive results were classified into faint and strong bands depending on the visual appearance of the test strip and confirmed by ELISA and Western blot.
Results:
The sensitivity and specificity of the Determine RDT were 100% (95% confidence interval = 86.8 to 100%) and 96.8% (95.9 to 97.6%) in whole blood and 100% (99.7 to 100%) and 97.9% (97.6 to 98.1%) in plasma respectively. Specificity was highly dependent on the tested sample type: when using whole blood, 67.1% of positive results were false positive, as opposed to 17.4% in plasma. Test strips with only faint positive bands were more often false positive than strips showing strong bands and were more common in whole blood than in plasma. Evaluation of the STAT-PAK RDT in plasma during the second year resulted in a sensitivity of 99.7% (99.1 to 99.9%) and a specificity of 99.3% (99.1 to 99.4%) with 6.9% of the positive results being false.
Conclusions:
Our study shows that the Determine HIV 1/2 strip test with its high sensitivity is an excellent tool to screen for HIV infection, but that â at least in our setting â it can not be recommended as a confirmatory test in VCT campaigns where whole blood is used
The Influence of Physiological Status on age Prediction of Anopheles Arabiensis Using Near Infra-red spectroscopy
Determining the age of malaria vectors is essential for evaluating the impact of interventions that reduce the survival of wild mosquito populations and for estimating changes in vectorial capacity. Near infra-red spectroscopy (NIRS) is a simple and non-destructive method that has been used to determine the age and species of Anopheles gambiae s.l. by analyzing differences in absorption spectra. The spectra are affected by biochemical changes that occur during the life of a mosquito and could be influenced by senescence and also the life history of the mosquito, i.e., mating, blood feeding and egg-laying events. To better understand these changes, we evaluated the influence of mosquito physiological status on NIR energy absorption spectra. Mosquitoes were kept in individual cups to permit record keeping of each individual insectâs life history. Mosquitoes of the same chronological age, but at different physiological stages, were scanned and compared using cross-validations. We observed a slight trend within some physiological stages that suggest older insects tend to be predicted as being physiologically more mature. It was advantageous to include mosquitoes of different chronological ages and physiological stages in calibrations, as it increases the robustness of the model resulting in better age predictions. Progression through different physiological statuses of An. arabiensis influences the chronological age prediction by the NIRS. Entomologists that wish to use NIR technology to predict the age of field-caught An. gambiae s.l from their study area should use a calibration developed from their field strain using mosquitoes of diverse chronological ages and physiological stages to increase the robustness and accuracy of the predictions.\u
- âŠ